HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 27
3 - ENABLE-MODE COMMANDS
 “show pfs configuration” on page 45
 “show pfs state shares” on page 45
 “show pfs stats shares” on page 46
 “show qos rules” on page 48
 “show radius” on page 48
 “show raid diagram” on page 49
 “show raid error-msg” on page 49
 “show running-config” on page 49
 “show service” on page 49
 “show service authentication” on page 50
 “show service connection pooling” on page 50
 “show service neural-framing” on page 50
 “show snmp” on page 50
 “show ssh client” on page 51
 “show ssh server” on page 51
 “show stats” on page 51
 “show tacacs” on page 52
 “show tcp highspeed” on page 53
 “show terminal” on page 53
 “show usernames” on page 53
 “show version” on page 53
 “show wccp” on page 54
 “show web” on page 54
 “show web prefs” on page 54
 “slogin” on page 55
 “stats export” on page 55
configure terminal
Description Enables configuration from the terminal by entering the configuration subsystem. To
exit the configuration subsystem, type exit. The no command option disables terminal
configuration.
Syntax configure terminal
Parameters None
Example
minna # configure terminal
minna (config) #