HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

104 4 - CONFIGURATION-MODE COMMANDS
license install
Description Installs a new software license key. The no command option disables this command.
Syntax license install <license key>
Parameters
Example
minna (config) # license install SH10_B-0000-1-7F14-FC1F
minna (config) #
limit bandwidth max
Description Enables bandwidth thresholds on the specified interface at the specified speed. The
no command option disables the bandwidth thresholds.
Syntax limit bandwidth max <interface> <kbps>
Parameters
Example
minna (config) # limit bandwidth max primary 500
minna (config) #
logging
Description Adds a remote syslog server to the system. The no command option removes a
remote syslog server from the system.
Syntax logging <addr> [trap <log level>]
Parameters
Example
minna (config) # logging 10.0.0.2
minna (config) #
<license key> Specifies the license key.
<interface> Specifies the interface name: aux, lan0_0, wan0_0, primary, in-
path0_0.
<kbps> Specifies the bandwidth in kbps. The default value is 1500.
<addr> Specifies the IP address for the System Log (syslog) server.
trap <log level> Specifies the trap log level of the syslog server. If you have set different
log levels for each remote syslog server, this option changes all remote
syslog servers to have a single log level.