HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide (November 2005)

32 3 - LOGICAL IN-PATH NETWORK DEPLOYMENTS
 On HP EFS WAN Accelerator B, plug the straight-through cable into
the WAN port of the HP EFS WAN Accelerator and the Layer-4 switch.
5. Connect to the Management Console. For details see the HP EFS WAN
Accelerator Management Console User Guide.
6. Navigate to the Setup: Optimization Service - General Settings page in the
Management Console.
7. Enable Layer-4 switch support. For example:
 Click Enable In-Path Support and Enable L4/PBR/WCCP Support on
Interface wan0_0.
Figure 3-2. Setup: Optimization Service - General Settings Page
8. Apply and save the new configuration in the Management Console.
9. Configure your L4 switch.
10. Restart the HP EFS WAN Accelerator in the Setup: Start/Stop Appliance
page of the Management Console.
11. Begin optimization. View performance reports and system logs in the
Management Console.