HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Installation and Configuration Guide (November 2005)

56 A - STATUS LIGHTS, TECHNICAL SPECIFICATIONS, AND REGULATORY INFORMATION
Bypass Card Status Lights
The HP EFS WAN Accelerator is equipped with one of the following types of
bypass interfaces (depending on your order):
 Two-Port Copper Gig-E Bypass Card
 Two-Port Fiber Gig-E Bypass Card
 EFS N4c WAN Accelerator 4-port NIC
Two-Port
Copper Gig-E
Bypass Card
The following section describes the Two-Port Copper Gigabit Ethernet (Gig-E)
Bypass Card status lights.
Figure 4-3. Adlink Two-Port Copper Gigabit-Ethernet (Gig-E) Bypass Card
The following table describes the Adlink Gig-E Status Lights
The following table describes the Adlink Gig-E card Light-Emitting Diode
(LED) lights.
Status Lights Signal Description
Intercept/
Bypass
Solid Normal, intercept state
Off Bypass state
Heartbeat
Solid Watchdog disabled
Flashing Watchdog running
Off Watchdog time out
Status Left LED (Green) Right LED (Green)
Network Link Not
Established
Off Off
10 Mbps
(10 Base T)
Link
On Off
Active
Flashing Off
100 Mbps
(100 Base T)
Link
Off On
Active
Off Flashing
1000 Mbps
(1000 Base T)
Link
On Flashing
Active
Flashing Flashing