HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 83
4 - CONFIGURATION-MODE
C
OMMANDS
Example minna (config) # image install version1.0 2
minna (config) #
image move
Description Moves or renames an inactive system image on the hard disk.
Syntax image move <source-image-name> <new-image-name>
Parameters
Example
minna (config) # image move www.domain.com/v.1.0 version1.0
minna (config) #
in-path enable
Description Enables in-path support. An in-path configuration is a configuration in which the HP
EFS WAN Accelerator is in the direct path of the client and the server. The no
command option disables in-path support.
Syntax in-path enable
Parameters None
Example
minna (config) # in-path enable
minna (config) #
in-path interface enable
Description Enables the in-path interface for optimization. The in-path interface enable
command is useful only when there are multiple bypass cards enabled (for example,
with a Four-Port Copper Gigabit-Ethernet Bypass card). The no command option
disables the in-path interface.
Syntax in-path interface <interface> enable
Parameters
Example
minna (config) #in-path interface 10.0.0.1 enable
minna (config) #
<source-image-name> Specifies the name of the software image to move or rename.
<new-image-name> Specifies the new name of the software image.
<interface> Specifies the IP address of the in-path interface.