HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

62 4 - CONFIGURATION-MODE COMMANDS
 “radius-server key” on page 131
 “radius-server retransmit” on page 131
 “radius-server timeout” on page 131
 “segstore receive port” on page 132
 “segstore send addr” on page 132
 “service connection pooling” on page 132
 “service default-port” on page 133
 “service enable” on page 133
 “service error reset” on page 133
 “service map-port” on page 134
 “service neural-framing stats enable” on page 135
 “service port” on page 135
 “snmp-server community” on page 135
 “snmp-server contact” on page 136
 “snmp-server enable” on page 136
 “snmp-server host” on page 136
 “snmp-server listen enable” on page 137
 “snmp-server listen interface” on page 137
 “snmp-server location” on page 137
 “ssh client generate identity user” on page 138
 “ssh client user authorized-key rsakey sshv2” on page 138
 “ssh server listen enable” on page 138
 “ssh server listen interface” on page 139
 “stats alarm” on page 139
 “stats chd” on page 140
 “stats clear-all” on page 140
 “stats export” on page 141
 “stats sample” on page 141
 “stats settings bandwidth” on page 142
 “tacacs-server host” on page 142
 “tacacs-server key” on page 143
 “tacacs-server retransmit” on page 144
 “tacacs-server timeout” on page 144
 “tcp highspeed enable” on page 144
 “terminal” on page 145
 “username disable” on page 146