HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 29
3 - ENABLE-MODE COMMANDS
Parameters
Example
minna # file stats delete cpu.csv
minna #
reload
Description Reboots the HP EFS WAN Accelerator. If the clean option is specified, the data store
is cleared before reboot occurs.
Syntax reload [clean [halt] | halt | force]
Parameters
Example
minna # reload
The session will close. It takes about 2-3 minutes to reboot the
appliance.
restart
Description Restarts the HP EFS WAN Accelerator service. If the clean option is specified, the
data store is cleared before restart occurs.
Syntax restart [clean]
Parameters
Example
minna # restart
Terminating the process....
Relaunching the process.
move <source filename>
<destination filename>
Specifies the source file to move and the destination file. The
following performance statistics are available: CPU
statistics, memory ultilization, memory paging, and
bandwidth statistics.
delete <filename> Specifies the statistics file to delete.
upload <filename>
<URL, scp:// or ftp://>
Specifies the statistics file to upload and the destination in
Universal Resource Locator (URL), scp://, or ftp:// format.
clean [halt] Clears the data store and reboots or shuts down the system. The reload
clean halt command clears the data store and shuts down the system.
halt Shuts down the system.
force Clears the data store, then reboots or shuts down the system.
clean Empties the data store before rebooting the system.