HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 147
4 - CONFIGURATION-MODE
C
OMMANDS
Parameters
Example
minna (config) # username admin password xyzzzZ
minna (config) #
username password 0
Description Sets the password for the specified user. The password must be a minimum of 6
characters.The password is returned in cleartext format on the command line.
Syntax username <userid> password 0 <password>
Parameters
Example
minna (config) # username admin password 0 xyzzzZ
minna (config) #
username password 7
Description Sets the password for the specified user. The password must be a minimum of 6
characters. The password is returned in encrypted format on the command line.
Syntax username <userid> password 7 <password>
Parameters
Example
minna (config) # username admin password 7 xyzzzZ
minna (config) #
wccp enable
Description Enables WCCP support. WCCP establishes and maintains the transparent redirection
of selected types of traffic flowing through a group of routers. The selected traffic is
redirected to a group of routers to reduce resource usage and lowering response times.
The no command option disables WCCP support.
You configure WCCP to redirect traffic to an HP EFS WAN Accelerator or group of
HP EFS WAN Accelerators:
<userid> Specifies the user login: admin or monitor.
<cleartext> Specifies the password. The password must be at least 6 characters.
<userid> Specifies the user login: admin or monitor.
<password> Specifies the password. The password must be a minimum of 6 characters.
<userid> Specifies the user login: admin or monitor.
<password> Specifies the password. The password must be a minimum of 6 characters.