HP StorageWorks Enterprise File Services WAN Accelerator Manager 3.0.2 release notes (AG424-96003, March 2007)

HP StorageWorks Enterprise File Services WAN Accelerator Manager 3.0.2 release notes 5
Global traffic summary
The HP EFS WAN Accelerator Manager provides the ability to view a pie chart breakdown of byte count
usage of all applications across all locations. Gain visibility into how much of the pipe FTP is taking versus
HTTP.
Performance report e-mailing
The HP EFS WAN Accelerator Manager provides a mechanism for receiving performance reports by
means of a recurring, scheduled e-mail.
QoS rules facility
The HP EFS WAN Accelerator Manager simplifies the configuration of the new QoS capability that comes
with RiOS v3.0 by providing the ability to configure and apply QoS rules centrally to hundreds of HP EFS
WAN Accelerators.
HP EFS WAN Accelerator image hosting for central updates
HP EFS WAN Accelerator Manager v3.0 adds the ability to store and host software images for quick and
seamless upgrade operations to hundreds of HP EFS WAN Accelerators.
Port labels enable you to apply rules to batches of ports
The HP EFS WAN Accelerator Manager provides port labels for secure and interactive ports. You can
create additional labels as needed.
Upgrading from version 2.1 to version 3.0
This section describes how to upgrade the HP EFS WAN Accelerator Manager software. These instructions
assume you are familiar with the HP EFS WAN Accelerator command line interface, and the HP EFS WAN
Accelerator Management Console.
To upgrade from version 2.1 to version 3.0:
1. Connect to the HP EFS WAN Accelerator Manager.
2. Click Setup Manager to display the Networking: Primary Interface page.
3. Click Software Upgrade to display the Software Upgrade page.
4. Under Install Software, specify an installation option:
• Install from URL
• Install from local file
5. Click Install Image.
6. Save the current configuration in the Configuration Management page.
7. Reboot the HP EFS WAN Accelerator Manager in the Reboot Manager page.
Miscellaneous issues
SNMP configuration
The HP EFS WAN Accelerator Manager has two graphical user interfaces; one for appliance management
and general system management (the Management Console), and the other for the HP System
Management Homepage. Use the Management Console or the command-line interface to modify SNMP
settings, rather than the System Management Homepage. To change the read-write community string, use
the snmp-server rwcommunity CLI command.
NOTE: The read-write community string must be different from the read-only community string for proper
functioning of the System Management Homepage.