HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Installation and Configuration Guide (November 2005)

38 2 - INSTALLING AND CONFIGURING THE HP EFS WAN ACCELERATOR
protocol://host.domain
protocol is http or https. Hypertext Transport Protocol Secure (HTTPS)
uses the Secure Sockets Layer (SSL) protocol to ensure a secure
environment. If you use HTTPS, to connect you are prompted to inspect
and verify the SSL key.
host is the host name you assigned to the HP EFS WAN Accelerator
during initial configuration. If your DNS server maps that IP address to a
name, you can specify the DNS name.
domain is the full domain name for the HP EFS WAN Accelerator.
NOTE: Alternatively, you can specify the IP address instead of the host and domain.
For example: http://169.254.169.254/.
The Management Console appears, displaying the Welcome page.
Figure 2-7. Welcome Page
2. In the Account text box, type the user login: admin, monitor, a login from
a Remote Authentication Dial-In User Service (RADIUS), or a Terminal
Access Controller Access Control System (TACACS+) database. The
default login is admin.
Users with administrator (admin) privileges can configure and
administer the HP EFS WAN Accelerator. Users with monitor (monitor)
privileges can view connected HP EFS WAN Accelerators, reports, and
system logs.
3. In the Password text box, type the password you assigned in the
configuration wizard.
4. Click Login to display the Home: Welcome page. The Home: Welcome
page summarizes the current performance of your system and provides
links to connected HP EFS WAN Accelerators, a traffic summary, alarms,
system logs, and HP technical support.