HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Installation and Configuration Guide (November 2005)

22 1 - OVERVIEW OF THE HP EFS WAN ACCELERATOR
8. On HP EFS WAN Accelerator-3, at the system prompt, enter the following
set of commands:
SH3 > enable
SH3 # configure terminal
SH3 (config) # no sport peer 0.0.0.0 version min
SH3 (config) # no sport peer 0.0.0.0 version max
SH3 (config) # no sport peer <HP EFS WAN Accelerator-1 IP addr> version
min
SH3 (config) # no sport peer <HP EFS WAN Accelerator-1 IP addr> version
max
SH3 (config) # no sport peer <HP EFS WAN Accelerator-2 IP addr> version
min
SH3 (config) # no sport peer <HP EFS WAN Accelerator-2 IP addr> version
max
SH3 (config) # no sport peer <HP EFS WAN Accelerator-4 IP addr> version
min
SH3 (config) # no sport peer <HP EFS WAN Accelerator-4 IP addr> version
max
SH3 (config) # write memory
SH3 (config) # restart
9. On HP EFS WAN Accelerator-4, at the system prompt, enter the following
set of commands:
SH4 > enable
SH4 # configure terminal
SH4 (config) # no sport peer 0.0.0.0 version min
SH4 (config) # no sport peer 0.0.0.0 version max
SH4 (config) # no sport peer <HP EFS WAN Accelerator-1 IP addr> version
min
SH4 (config) # no sport peer <HP EFS WAN Accelerator-1 IP addr> version
max
SH4 (config) # no sport peer <HP EFS WAN Accelerator-2 IP addr> version
min
SH4 (config) # no sport peer <HP EFS WAN Accelerator-2 IP addr> version
max
SH4 (config) # no sport peer <HP EFS WAN Accelerator-3 IP addr> version
min
SH4 (config) # no sport peer <HP EFS WAN Accelerator-3 IP addr> version
max
SH4 (config) # write memory
SH4 (config) # restart