HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 77
4 - CONFIGURATION-MODE
C
OMMANDS
Syntax email notify failures enable
Parameters None
Example
minna (config) # email notify failures enable
minna (config) #
email notify failures recipient
Description Sets the recipient for email notification of HP EFS WAN Accelerator failures such as
core dumps. The no command option disables the email recipient.
Syntax email notify failures recipient <email addr>
Parameters
Example
minna (config) # email notify failures recipient [e-mail]
minna (config) #
email send-test
Description Sends test email to all configured event and failure recipients.
Syntax email send-test
Parameters None
Example
minna (config) # email send-test
minna (config) #
failover buddy addr
Description Sets the failover IP address. The failover HP EFS WAN Accelerator is the backup HP
EFS WAN Accelerator. If the master HP EFS WAN Accelerator fails the failover HP
EFS WAN Accelerator takes over. The default value is 0.0.0.0. The no command
option resets the failover IP address to the default value.
Syntax failover buddy addr <addr>
Parameters
Example
minna (config) # failover buddy addr 10.10.10.1
minna (config) #
recipient <email-addr> Specifies the email address of users to receive notification of
failures.
<addr> Specifies the IP address for the failover, backup HP EFS WAN
Accelerator. The default value is 0.0.0.0.