HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

150 4 - CONFIGURATION-MODE COMMANDS
Example minna (config) # wccp 999 router 10.0.0.0
minna (config) #
web auto-logout
Description Sets the number of minutes before the Management Console automatically logs out
the user. The default value is 15 minutes. The no command option disables the
automatic log out feature.
Syntax web auto-logout <minutes>
Parameters
Example
minna (config) # web auto-logout 20
minna (config) #
flags <hash-bit-
identifier>
Specifies the combination of src-ip-hash, dst-ip-hash, src-port-
hash, dst-port-hash, ports-dest, ports-source that define the fields
the router hash on and if certain ports should be redirected.
ports
<portnumber>
Specifies a comma separated list of up to 7 ports that the router will
redirect. Use only if ports-dest or ports-source service flag is set.
priority <priority-
number>
Specifies the WCCP priority for traffic redirection. If a connection
matches multiple service groups on a router, the router chooses the
service group with the highest priority. The range is 0-255. The
default value is 200.
password <string> Specifies the WCCP password. This password must be the same as
the password on the router. (WCCP requires that all routers in a
service group have the same password.) Passwords are limited to 8
characters.
weight <value> The weight determines how often the traffic is redirected to a
particular HP EFS WAN Accelerator. A higher weight redirects more
traffic to that HP EFS WAN Accelerator. The ratio of traffic
redirected to an HP EFS WAN Accelerator is equal to its weight
divided by the sum of the weights of all the HP EFS WAN
Accelerators in the same service group. For example, if there are two
HP EFS WAN Accelerators in a service group and one has a weight of
100 and the other has a weight of 200, the one with the weight 100
receives 1/3 of the traffic and the other receives 2/3 of the traffic. The
range is 0-65535. The default value corresponds to the HP EFS WAN
Accelerator model.
encap_scheme
<string>
Specifies the traffic forwarding and redirection scheme: Generic
Routing Encapsulation (gre) or Layer-2 (l2) redirection. The either
value uses Layer-2 first—if Layer-2 is not supported, gre is used.
<minutes> Specifies the number of minutes before the system automatically logs out
the user.