HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

118 4 - CONFIGURATION-MODE COMMANDS
protocol cifs prepop enable
Description Enables CIFS transparent prepopulation. The no command option disables
transparent prepopulation.
Syntax protocol cifs prepop enable
Parameters None
Example
minna (config) # protocol cifs prepop enable
minna (config) #
protocol cifs secure-sig-opt enable
Disables SecuritySignature negotiations between a Windows client and the server. By
default the Secure-CIFS feature is disabled.
For detailed information about disabling Windows security signing, see the HP
StorageWorks Enterprise File Services WAN Accelerator Installation and
Configuration Guide.
When a Windows server is set to SecuritySignatureEnable, the HP EFS WAN
Accelerator stops CIFS transaction prediction optimization but continues performing
SDR optimization. When the HP EFS WAN Accelerator secure-sig-opt command is
set to enable, the HP EFS WAN Accelerator continues to perform CIFS optimization
for connections even when the SecuritySignatureEnable setting is specified. (The HP
EFS WAN Accelerator does not continue to optimize traffic if the
SecuritySignatureRequired setting is specified on the server.)
Syntax protocol cifs secure-sig-opt enable
Parameters None
Example
minna (config) # protocol cifs secure-sig-opt enable0
minna (config) #
protocol connection lan receive buf-size
Description Sets the LAN buffer size for high-speed Transmission Control Protocol (HSTCP)
support.
You must increase your LAN buffer size to 1 MB. For detailed information about
configuring HSTCP, see “tcp highspeed enable” on page 144.
Syntax protocol connection lan receive buf-size <bytes>
Parameters
<bytes> Specifies the LAN default receive buffer size. The default value is 32768.