HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Tru64 UNIX Release Notes (AA-RV1WA-TE, March 2005)

Hardware and Software Support
32 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Tru64
UNIX Release Notes
■ For Tru64 UNIX V5.1B: Tru64 UNIX V5.1B Patch Kit 4
■ For Tru64 UNIX V4.0G: Tru64 UNIX V4.0G Patch Kit 4
Note: When mixing ACS and VCS based storage in the same environment, a special
Tru64 UNIX early release patch (ERP) for OS V5.1x is required. This ERP is currently
under development, but should be available at the time this Solution Software Kit is
released.
Patch Kits are available at the following web site:
http://tru64unix.compaq.com/support.html
■ Some ES40 systems manufactured from January through March 2001 may
have a component on the CSB that might affect the operation of some 64-bit
PCI HBA options. See Tru64 UNIX Action Blitz #TD3004-A for details.
StorageWorks Command Console (SWCC)
SWCC V2.5 is included in this release and is used to identify the SWCC suite of
components.
SWCC provides a graphical user interface that can be used to configure and
monitor your storage system. Use of SWCC is highly recommended, but not
required. The SWCC Agent is installed as part of the Solution Software Kit.
For more information on SWCC installation, see the HP StorageWorks HSG80
ACS Solution Software Installation and Configuration Guide. For more
information on SWCC Client operation, see the Command Console Version 2.5
User Guide and the Command Console Version 2.5 Release Notes.
SWCC Scalability
■ The SWCC Client can monitor up to 128 host systems, each with up to 32
storage systems, for a maximum of 4096 concurrent storage connections and a
total of 2.65 PB of storage.
■ One Agent can support up to 32 Clients.