HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
264 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
447C0101 Unhandled command HTB status:
Last failure parameter [0] contains the status value.
The host port transport ran out of work requests.
01
447D0100 The host port transport ran out of command HTBs. 01
44800101
44810101
An illegal status was returned to the name service command error
handler:
Last failure parameter [0] contains error value.
Changes to Port Login (PLOGI).
01
44820101 An illegal abort type was given to the host port transport abort handler.
Last failure parameter [0] contains abort type.
01
44830101 An illegal failover request was given to the host port transport request
handler:
Last failure parameter [0] contains failover request.
01
44840101 An illegal failover response was given to the host port transport failover
response handler:
Last failure parameter [0] contains failover response.
01
44850100 The host port transport failover control had a bad send count. 01
44860100 Unable to allocate enough ESD structures for Fibre Channel host port
transport software layer.
01
44870101 An illegal abort type was given to the host port transport abort handler:
Last failure parameter [0] contains abort type.
01
44892091 Host port hardware diagnostic field at system initialization:
Last failure parameter [0] contains failed port number.
20
448B0100 Host port transport software layer unable to allocate work item for
updating NV memory during LOGI.
01
448C0100 Host port transport software layer unable to allocate work item for LOGI
completion routine.
01
448E0100 Host port transport software layer unable to allocate memory for quick
FC responses.
01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 51 of 55)
Last
Failure
Code
Description
Repair
Action
Code