HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes

253HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide

0A300100 ILF_DEPOPULATE_DWD_TO_CACHE buffer stack entry zero or not

page aligned.

0A310100 ILF_DISTRIBUTE_CACHE_DWDS active handle count not as expected. 01

0A320102 ILF$LOG_ENTRY, page guard check failed:

Last failure parameter [0] contains the DWD address value.

Last failure parameter [1] contains the buffer address value.

0A330100 ILF_OUPUT_ERROR, MESSAGE_KEEPER_ARRAY full. 01

0A340101 ILF_OUTPUT_ERROR, no memory for message display.

Last failure parameter [0] contains the message address value.

0A360100 Duplicate entry found in ILF_POPULATE_DWD_FROM_CACHE buffer

stack.

0A370100 Duplicate entry found in ILF_REBIND_CACHE_BUFFS_TO_DWDS

buffer stack.

0A380108 Next entry was partially loaded:

Last failure parameter [0] contains the next entry address.

Last failure parameter [1] contains the next entry record type.

Last failure parameter [2] contains the next entry time of day (TOD) flag.

Last failure parameter [3] contains the next entry interrupt (INT) flag.

Last failure parameter [4] contains the next entry byte count.

Last failure parameter [5] contains the next entry TOD ticks.

Last failure parameter [6] contains the next entry TOD days.

Last failure parameter [7] contains the next entry data start.

0B010010 Due to an operator request, the controller nonvolatile configuration

information was reset to its initial state.

0B020100 The controller has insufficient free memory to allocate a Configuration

Manager work item needed to perform the requested configuration reset.

0B030100 Changes to restore. 01

Table 56: Last Failure Codes and Repair Action Codes (Sheet 40 of 55)

Last

Failure

Code

Description

Repair

Action

Code