HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
247HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
04140103 The template value found in the EIP is not supported by the Fault
Manager. The bad template value was discovered while trying to build
an ESD:
Last failure parameter [0] contains the Instance Code value.
Last failure parameter [1] contains the template code value.
Last failure parameter [2] contains the requester error table index value.
01
04170102 The template value found in the ESD is not supported by the Fault
Manager. The bad template value was discovered while trying to
translate an ESD into an EIP:
Last failure parameter [0] contains the Instance Code value.
Last failure parameter [1] contains the template code value.
01
04180103 The COMMON$MEM_FAIL_TEMPLATE template found in the ESD is not
supported by the Fault Manager. The bad template was discovered while
trying to translate an ESD into an EIP:
Last failure parameter [0] contains the Instance Code value.
Last failure parameter [1] contains the template code value.
Last failure parameter [2] contains the template flags value.
01
04190100 A NULL pointer was found for the TARGET_CTX, or the TARGET_CTX
has an invalid type.
01
05010100 In RECURSIVE_NONCONFLICT could not get enough memory for
scanning the keyword tables for configuration name conflicts.
01
06010100 The DUART was unable to allocate enough memory to establish a
connection to the CLI.
01
06020100 A port other than terminal port A was referred to by a set terminal
characteristics command. This is illegal.
01
06030100 A Diagnostic Utility Protocol (DUP) question or default question message
type was passed to the DUART driver, but the pointer to the input area to
receive the response to the question was NULL.
01
06040100 Attempted to detach unattached maintenance terminal. 01
06050100 Attempted output to unattached maintenance terminal. 01
06060100 Attempted input from output only maintenance terminal service. 01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 34 of 55)
Last
Failure
Code
Description
Repair
Action
Code