HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Instance Codes
205HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
03FF0F01 The EMU-detected external air sense fault is now
fixed. In this instance, the Associated Target,
Associated ASC, and Associated ASCQ fields are
undefined.
41 0F
07030B0A The failover control detected a receive packet
sequence number mismatch. The controllers are out of
synchronization with each other and are unable to
communicate. The Last Failure Code and Last Failure
Parameters fields are undefined.
05 0B
07040B0A The failover control detected a transmit packet
sequence number mismatch. The controllers are not
synchronized with each other and cannot
communicate. In this instance, the Last Failure Code
and Last Failure Parameters fields are undefined.
05 0B
07050064 The failover control received a last gasp message
from the “other controller.” The “other controller” is
expected to restart within a given time period. If the
“other controller” does not, the “other controller” is
reset with the kill line.
05 00
07060C01 The failover control detected that both controllers are
acting as SCSI ID 6. Since IDs are determined by
hardware, it is unknown which controller is the real
SCSI ID 6. In this instance, the Last Failure Code and
Last Failure Parameters fields are undefined.
05 0C
07070C01 The failover control detected that both controllers are
acting as SCSI ID 7. Since IDs are determined by
hardware, it is unknown which controller is the real
SCSI ID 7. In this instance, the Last Failure Code and
Last Failure Parameters fields are undefined.
05 0C
07080B0A The failover control was unable to send a
keepalive
communication to the “other controller.” It is assumed
that the “other controller” is inoperable or not started.
In this instance, the Last Failure Code and Last Failure
Parameters fields are undefined.
05 0B
Table 53: Instance Codes and Repair Action Codes (Sheet 25 of 30)
Instance
Code
Description Template
Repair
Action
Code