HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Event Reporting Templates
137HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
Passthrough Device Reset Event Sense Data Response template
Events reported by passthrough devices during host and device operations are
conveyed directly to the host system without intervention or interpretation by the
array controllers, with the exception of device sense data that is truncated to 160
bytes if it exceeds 160 bytes.
Events that are related to passthrough device recognition, initialization, and SCSI
bus communication events, result in a reset of a passthrough device by the HSG60
and
HSG80 controller. These events are reported through standard SCSI Sense
Data (see Table 37). For all other events, see the templates contained within this
section.
■ ASC and ASCQ codes (byte offsets 12 and 13) are detailed in the “ASC,
ASCQ, Repair Action, and Component Identifier Codes” chapter that starts
on page 161.
■ Instance Codes (byte offsets 8–11) are detailed in the “Instance Codes”
chapter that starts on page 177.
Table 37: Passthrough Device Reset Event Sense Data Response Format
↓
offset
bit
→ 7 6 5 4 3 2 1 0
0Valid Error code
1Segment
2 FM EOM ILI Reserved Sense key
3–6 Information
7 Additional sense length
8–11 Instance Code
12 ASC
13 ASCQ
14 Field-replaceable unit code
15 SKSV Sense key specific
16 Sense key specific
17 Sense key specific