HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Glossary
300 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
TMSCP
Tape mass storage control protocol. The protocol by which blocks of information are
transferred between the host and a CI controller on the CI Bus with tape devices.
topology
An interconnection scheme that allows multiple Fibre Channel ports to communicate with
each other. For example, point-to-point, Arbitrated Loop, and switched fabric are all Fibre
Channel topologies.
transfer data rate
The speed at which data may be exchanged with the central processor, expressed in
thousands of bytes per second.
Transparent Failover
A controller operational mode that allows the storage array remain available to the host by
allowing the surviving controller of a dual redundant pair to take over total control of the
subsystem and is transparent (invisible) to the host(s).
ULP
Upper Layer Protocol.
ULP process
A function executing within a Fibre Channel node which conforms to the ULP requirements
while interacting with other ULP processes.
ultra SCSI bus
A wide, fast-20 SCSI bus.
uninterruptible power supply
See UPS.
unit
A container made accessible to a host. A unit may be created from a single disk drive. A
unit may also be created from a more complex container such as a RAIDset. The controller
supports a maximum of eight units on each target.
See also target and target ID number.
unwritten cached data
Sometimes called unflushed data.
See also dirty data.
UPS
Uninterruptible power supply. A battery-powered power supply guaranteed to provide
power to an electrical device in the event of an unexpected interruption to the primary
power supply. Uninterruptible power supplies are usually rated by the amount of voltage
supplied and the length of time the voltage is supplied.