HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
254 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
0B040100 The controller has insufficient free memory to allocate a Configuration
Manager WWL work item needed to perform the requested WWLID
change.
01
0B050100 More requests to WWL$NOTIFY have been made than can be supported. 01
0B060100 A call to WWL$UPDATE resulted in the need for another World-Wide
LUN ID slot, and no free slots were available.
01
0B070100 The controller has insufficient free memory to allocate a Configuration
Manager Device Nickname (DNN) work item needed to perform the
requested DNN change.
01
0B080100 More requests to DNN$NOTIFY have been made than can be supported. 01
0B090100 A call to DNN$UPDATE resulted in the need for another DNN slot, and
no free slots were available.
01
OB0A0100 Unable to find any unused storage groups 01
OB0B0100 Unable to find any unused partition group. 01
OB0C0100 Unable to allocate memory to use for communication with the DT
manager.
01
0D000011 The EMU firmware returned a bad status after directed to power off.
Last failure parameter [0] contains the value of the bad status.
00
0E000100 VA$ENABLE_NOTIFICATION failed with insufficient resources at
controller initialization time.
01
0E010102 An invalid status was returned from CACHE$LOCK_READ during a
remote copy:
Last failure parameter [0] contains the DD address.
Last failure parameter [1] contains the invalid status.
01
0E020100 Unable to allocate memory for the Fault Management Event Information
Packet used in generating error logs to the host.
01
0E030100 Unable to allocate memory for a Failover Control Block. 01
0E040100 Unable to allocate memory for a Failover Control Block. 01
0E050100 Unable to allocate memory for a Failover Control Block. 01
0E060100 Unable to allocate memory for a Failover Control Block. 01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 41 of 55)
Last
Failure
Code
Description
Repair
Action
Code