HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
175HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Changes the characteristics of an association set.
Note: This command works only in a DRM environment and requires an HSG80
controller with ACS V8.8-
x P. Like all DRM commands, use of this command is heavily
restricted. Refer to the latest version of the Operations Guide for the HP StorageWorks
Data Replication Manager application for examples of usage.
Syntax
SET association-set-name
Note: Only one characteristic of an association set can be changed at any one time;
therefore, only one switch at a time can be specified with any SET
association-set-name command.
Parameters
The following parameter is associated with this SET command:
association-set-name
Identifies the name of the association set whose characteristics are to be
changed.
Switches
The following switches support the SET association-set-name
command:
■ ADD
■ FAIL_ALL and NOFAIL_ALL
■ LOG_UNIT and NOLOG_UNIT
SET association-set-name