HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
168 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
■ Specify IGNORE_ERRORS to instruct the controller to restart even if the
data within writeback cache cannot be written to the devices.
■ Specify NOIGNORE_ERRORS to instruct the controller to not restart if
the data within writeback cache cannot be written to the devices.
IMMEDIATE_SHUTDOWN
NOIMMEDIATE_SHUTDOWN (default)
Instructs the controller when to shut down and whether to flush the writeback
cache or not.
Caution: The IMMEDIATE_SHUTDOWN switch instructs the controller to
immediately shut down without regard to any data contained within
writeback cache. Do not perform any hardware changes until the controller
flushes the cache.
■ Specify IMMEDIATE_SHUTDOWN to instruct the controller to restart
immediately without flushing data from the writeback cache to devices.
■ Specify NOIMMEDIATE_SHUTDOWN to instruct the controller not to
restart before all data is flushed from writeback cache to the devices.
Examples
To restart “this controller,” enter:
RESTART THIS_CONTROLLER
To restart “other controller,” enter:
RESTART OTHER_CONTROLLER
See Also
SELFTEST
SHUTDOWN controller