HP StorageWorks HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide (AA-RV1PA-TE, March 2005)

Using CLI for Configuration
160 HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide
RENAME !NEWCON00 RED1B1
SET RED1B1 OPERATING_SYSTEM=VMS
RENAME !NEWCON01 RED1A1
SET RED1A1 OPERATING_SYSTEM=VMS
SHOW CONNECTIONS
Note: Connection table sorts alphabetically.
Mark or tag both ends of Fibre Channel cables.
Plug in the Fibre Channel cable from the second adapter in host “RED.”
SHOW CONNECTIONS
Connection
Name
Operating
System
Controller Port Address Status
Unit
Offset
RED1A1 VMS OTHER 1 XXXXXX OL
other
0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
RED1B1 VMS THIS 1 XXXXXX OL this 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
Connection
Name
Operating
System
Controller Port Address Status
Unit
Offset
!NEWCON
02
VMS THIS 2 XXXXXX OL this 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
!NEWCON
03
VMS OTHER 2 XXXXXX OL
other
0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX
RED1A1 VMS OTHER 1 XXXXXX OL
other
0
...