HP StorageWorks HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide (AA-RV1PA-TE, March 2005)

Installing and Configuring the HSG Agent
120 HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide
Caution: After you make a change to the configuration, such as adding a
client system, you must stop and then start the Agent for your changes take
effect. When you stop and then start the Agent, the Storage Windows for the
subsystems connected to the agent system lose their connection. To regain that
connection, close and then reopen the Storage Windows connected to the
agent system after you restart the Agent.
SWCC Agent for HS* Controllers Configuration Menu
Agent is enabled as TCP/IP Services for OpenVMS service.
Agent is now: active
Agent Admin Options:
1)Change Agent password
2)Agent Enable/Start
3)Agent Disable/Stop
4)Uninstall Agent
Client Options:
5)Add a Client
6)Remove a Client
7)View Clients
Storage Subsystem Options:
8)Add a subsystem
9)Remove a subsystem
10)View subsystems
E)Exit configuration procedure