HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

ManualsBrandsHP ManualsSoftwareHP StorageWorks HSG80 ACS V8.8S for Switched Fabrics w/Snapshot Software

221

222

223

224

225

226

227

228

229

230

Last Failure Codes

223HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide

01992088

An error was detected by the PLX:

Last failure parameter [0] contains the value of read diagnostic register 0.

Last failure parameter [1] contains the value of read diagnostic register 1.

Last failure parameter [2] contains the value of write diagnostic register 0.

Last failure parameter [3] contains the value of write diagnostic register 1.

Last failure parameter [4] contains the IBUS address of the error register.

Last failure parameter [5] contains the PLX status register.

Last failure parameter [6] contains the previous PDAL address of the error

Last failure parameter [7] contains the RIP.

019A2093 Hardware port hardware failure—TACHYON:

Last failure parameter [0] contains failed port number.

Last failure parameter [1] contains Gluon status.

Last failure parameter [2] contains TACHYON status.

02010100 Initialization code was unable to allocate enough memory to set up the

send data descriptors.

02040100 Unable to allocate memory necessary for data buffers. 01

02050100 Unable to allocate memory for the free buffer array. 01

02080100

02090100

020C0100

A call to EXEC$ALLOCATE_MEM_ZEROED failed to return memory after

populating the disk read Device Work Descriptor (DWD) stack.

Changes to disk write.

Changes to miscellaneous.

02100100 A call to EXEC$ALLOCATE_MEM_ZEROED failed to return memory after

creating the device services state table.

02170100 Unable to allocate memory for the free node array. 01

021D0100 Unable to allocate memory for the free buffer array. 01

021F0100 Unable to allocate memory for Write Algorithm Request Packets

(WARPs) and RAID Member Data (RMDs).

02210100 Invalid parameters in CACHE$OFFER_META call. 01

Table 56: Last Failure Codes and Repair Action Codes (Sheet 10 of 55)

Last

Failure

Code

Description

Repair

Action

Code