HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes

239HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide

03390108 An unknown interrupt code was found in a device port DSPS register:

Last failure parameter [0] contains the PCB PORT_PTR value.

Last failure parameter [1] contains the PCB copy of the device port TEMP

Last failure parameter [2] contains the PCB copy of the device port DBC

Last failure parameter [3] contains the PCB copy of the device port

DNAD register.

Last failure parameter [4] contains the PCB copy of the device port DSP

Last failure parameter [5] contains the PCB copy of the device port DSPS

Last failure parameter [6] contains the PCB copies of the device port

SSTAT2/SSTAT1/SSTAT0/DSTAT registers.

Last failure parameter [7] contains the PCB copies of the device port

LCRC/RESERVED/ISTAT/DFIFO registers.

033C0101 An invalid code was seen by the error recovery thread in the

ER_FUNCT_STEP field of the PCB:

Last failure parameter [0] contains the PCB ER_FUNCT_STEP code.

Table 56: Last Failure Codes and Repair Action Codes (Sheet 26 of 55)

Last

Failure

Code

Description

Repair

Action

Code