FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Error Messages
222 CLI Reference Guide for Directors and Edge Switches
Error 29: Invalid Gateway
Address
The value entered for the
gateway address is
invalid.
The new gateway address
for the Ethernet interface
must be entered in dotted
decimal format (for
example, 0.0.0.0). Enter
the gateway address for
the Ethernet interface in
the dotted decimal format.
Error 30: Invalid IP
Address
The value entered for the
IP address of the director
or edge switch is invalid.
The IP address for the
Ethernet interface must be
entered in dotted decimal
format (for example,
10.0.0.0). Enter the IP
address for the Ethernet
interface in dotted
decimal format.
Error 31: Invalid Subnet
Mask
The value entered for the
new subnet mask for the
Ethernet interface is
invalid.
The subnet mask must be
entered in dotted decimal
format (for example,
255.0.0.0). Enter the
subnet mask for the
Ethernet interface in
dotted decimal format.
Error 32: Invalid SNMP
Community Name
The value entered for the
SNMP community name
is invalid.
The SNMP community
name is the name of the
community specified in
the
config.snmp.addCom
munity command. The
community name must not
exceed 32 characters.
Valid characters include
all those in the ISO
Latin-1 character set.
Duplicate community
names are allowed, but
the corresponding
writeAuthorization values
must match. Enter an
SNMP community name
that meets all of the
requirements.
Table 5: CLI Error Messages (Continued)
Message Description Action