hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

fca2355 dual channel PCI host bus adapter installation guide 5–5
Diagnostic and Configuration Utilities
DOS Diagnostic Utility Main Menu
After the diagnostic and firmware download utility goes through its start-up
procedure, the Main menu displays and handles user requests. If the program detects
two or more HBAs in the system, you are prompted to select which HBAs is to be
tested.
Table 5–1 lists the function of each option on the Main menu.
NOTE: Enter zero (0) at the Option prompt to display the previous menu. All values are in
reported hexadecimal.
The menu options and descriptions are described in the following sections.
LightPulse Utility/NT Utility
The LightPulse Utility/NT utility (lputilnt) is a FCA2355 Host Bus Adapter (HBA)
utility that lets you:
• View HBA parameters
• Modify driver parameters in the Windows registry
These parameters have been set by the Original Equipment Manufacturer (OEM)
setup file provided in the software kit. The Fibre Channel setup file, run as part of the
platform kit configuration, will also modify them. The resulting parameter setting has
been modified to provide the optimal setting for the supported configurations.
Table 5–2: DOS Diagnosis Utility Main Menu Selections
Menu Selection Description
1 – Test Host Adapters Runs host-based internal and external loopback tests.
2 – Modify Test Options Enables you to disable or enable up to seven different tests,
depending upon the cards installed (BIU-1 or BIU-2).
Specify number of retries and actions to take if error occurs.
3 – Restart Host Adapters Resets the HBA.
4 – Input/Output Opens or closes input and output files.
5 – Maintenance Updates firmware or non-volatile parameters in FLASH
ROM. Displays program images stored in memory.
6 – Show Host Adapters Info Displays configuration and status data used by HP
Technical Support.
7 – Quit Exits the program.