Web Tools User's Guide (Version 3.0)

Web Tools User’s Guide 3-45
Fabric View
3
Following is a description of the fields on the Quick Loop tab.
QuickLoop Name Select an existing QuickLoop member to modify.
Create Qloop Click to create a new Quickloop member.
Delete Qloop Click to delete a Quickloop member.
Rename Qloop Click to rename a Quickloop member.
Switch Selection List This field displays a list of potential QuickLoop members, including
switches, ports, WWNs, and QuickLoop AL_PAs, and Fabric Assist.
QuickLoop Members This field displays a list of the zone members selected in the
QuickLoop Name field. The name on this list depends on the name of
the selected QuickLoop member. If a name is not selected, the name
displays as “null Members”.
Search Mem Click to search for a Switch name, WWN, Alias, Zone, QuickLoop, in
the Member Selection List based on the type of objects displayed in
that list.
Add Mem Click to add a member from the member selection list into the
QuickLoop member contents.
Remove Mem Click to remove a member from the QuickLoop member list when
selected.
Ref Zone Click to refresh the local zoning data base copied from the switch.
This button automatically flashes red/gray if the fabric zoning data is
changed by another client.
A/D WWN Click to add or delete a WWN to or from all the aliases, zones
defined.
Rpl WWN Click to replace WWN with another one in all aliases, zones defined.
OK Click to apply the changes to the switch and exit the window.
Apply Click to apply the changes to the switch.
Close Click to exit the window without making any changes to the switch.
Clr All Select to clear all Aliases, Zones, and Configs locally on the window.