Web Tools User's Guide (Version 3.0)

3-38 Web Tools User’s Guide
Fabric View
3
AL_PA Device Config
Use the AL_PA Device Config tab to specify the Device Zone that belongs to the Device Zone
Configuration file. All members of this configuration file must be Zones consisting entirely of
AL_PAs in a QuickLoop. The AL_PA Device Config tab is shown in Figure 3-21.
Figure 3-21 AL_PA Device Config tab of the AL_PA Level Zoning menu
Following is a description of the fields on the AL_PA Device Config tab.
Cfg Name Select an existing AL_PA Configuration name to modify.
Create Cfg Click to create a new AL_PA configuration.
Delete Cfg Click to delete a AL_PA configuration.
Rename Cfg Click to rename a AL_PA configuration.
Zone/QLoop Selection List A list of Zone/QuickLoop members available to add to the
AL_PA configuration.
Add Mem Click to add a member from the Zone Selection List into the
Configuration Member List.
Remove Mem Click to remove a member from the Zone Selection List into
the Configuration Member List.
Search Mem Click to search for a Switch name, WWN, Alias, Zone, Qloop
in the Member Selection List based on the type of objects
displayed in that list.