Web Tools User's Guide (Version 3.0)

5-8 Web Tools User’s Guide
Port View
5
Loop Tab
The Loop tab provides information about any loop on the port, including the following:
• Loop statistics
• Local AL_PA statistics
• QuickLoop looplet statistics (if the port is a member of the QuickLoop)
• QuickLoop statistics (if the port is a member of the QuickLoop)
If the port is not a loop-enabled port, the following information displays:
“Not an L_Port. No loop info available.” The Loop tab is shown in Figure 5-4.
Figure 5-4 The Loop tab in the Port Information View
Following is a description of the fields on the Loop tab:
FL Port Transfer Displays number of times FL_Port used transfer state.
FL Tenancies Displays the number of times FL_Port opens loop tenancy.
NL Tenancies Displays the number of times NL_Port opens loop tenancy.
QL/Zone Inits Caused Displays number of times looplet has caused QuickLoop to be
initialized.
Successful QL/Zones Inits Displays number of times looplet has successfully initialized.
Number of Failed QL/Zone
Inits
Displays number of times looplet failed to successfully
initialize.
Times Being Bypassed Displays number of times looplet was not included as part of
QuickLoop.