Web Tools User's Guide (Version 3.0)

4-54 Web Tools User’s Guide
Switch View
4
The following is a description of the fields on the Configure tab:
BB Credit Displays the number of buffers that are available to attached devices
for frame receipt.
E_D_TOV Displays the Error Detect Time Out Value in milliseconds. This timer
is used to flag a potential error condition when an expected response is
not received within the set time.
R_A_TOV Displays the Resource Allocation Time Out Value in milliseconds.
This variable works withe the E_D_TOV to determine switch actions
when presented with an error condition.
Datafield Size Specifies in bytes, the largest possible data field size.
Non-SCSI Tachyon
Mode
Per-Frame Routing
Priority
When set, the virtual channel ID is used in conjunction with a frame
header to form the final virtual channel ID.
Suppress Class F
Traffic
Only applies if VC Encoded Address Mode is also set. When set,
translative addressing is disabled.
Disable Device
Probing
When set, devices that do not register with the Name Server are not
present in the Name Server data base. Set this mode only if the switch
N_Port discovery process (PLOGI, PRLI, INQUIRY) causes an
attached device to fail.
VC Encoded Address
Mode
When set, the frame source and destination address use an address
format that is compatible with FC16 switches. Set this mode only if the
fabric includes this type of switch.
Virtual Channel
Parameters
Enables fine tuning for a specific application by configuring the
parameters for eight virtual channels.
Send Fan Frames Specifies that Fabric Access Notification frames be sent to public loop
devices to notify them of their node ID and address.
Always Send RSCH Issues a Remote State Change notification, following the completion
of loop initialization, when FL_Ports detect the presence of new
devices or the absence of preexisting devices.
Do Not Allow AL_PA
0x00
Check box to specify that AL-PA is not allowed.
rstatd Dynamically enables or disables a server that returns information
about system operation information through remote procedure calls.
rapid Check box to enable rapid system service.
rusersd Dynamically enables or disables a server that returns information
about the user who is logged into the system through remote procedure
calls.
RLS Probing Check to enable RLS Probing services.