SAN Switch 2/8 V3.1.x - Installation Guide

Installing the SAN Switch 2/8
29SAN Switch 2/8 Version 3.1.x Installation Guide
* Depending on time of purchase, the Fixed Rack Mount Kit items listed in Table 3 may
not represent the kit that shipped with your switch. For a complete list of possible HP
rack mount kits, see Installation Guidelines on page 30.
Table 3: Shipping Carton Contents
Item
Number
Description
1 One HP StorageWorks SAN Switch 2/8
product accessory bag containing CD,
license, documentation and Release
Notes
2HP StorageWorks Switch 2/8
3 One standard AC power cord, and one
PDU cord
4 One RS-232 Serial cable
5 *Fixed Rack Mount Kit containing:
• right front bracket
• left front bracket
• right rear bracket
• left rear bracket
6 Pouch containing Fixed Rack Mount Kit
hardware:
• 8-32 x 5/16-inch pan head Phillips
screws (6)
• 6-32 x 5/16-inch pan head Phillips
screws (8)
• 10-32 x 5/8-inch pan head Phillips
screws (8)
•retainer nuts (8)
• rubber mounting feet (4), use if
installing on a flat surface