SAN Switch 2/8 V3.1.x - Installation Guide

Overview
19SAN Switch 2/8 Version 3.1.x Installation Guide
Hardware
SAN Switch 2/8 consists of the following components:
■ A 1-Unit (U) chassis, designed for mounting in a 19-inch rack, with forced-air
cooling that flows from the back of the switch to the front
■ Eight optical ports, compatible with Small Form Factor Pluggable media
(SFPs), (supplied by the customer)
■ One RS-232 Serial port (DB9 connector) on the front panel
■ One IEEE compliant RJ-45 connector on the front panel for use with 10/100
Mbps Ethernet or in-band
■ A total of 20 LEDs:
— One power switch LED on the front panel
— One port status LED for each of the 8 ports on the front panel
— One port speed LED for each of the 8 ports on the front panel
— One Ethernet speed LED on the front panel
— One Ethernet activity LED on the front panel
— One port readiness LED on the back panel
■ Universal input power supply with AC switch
■ Five fans