SAN Switch 2/8 - Release Notes

Compatibility
14 SAN Switch 2/8 Version 3.1.x Release Notes
■ Relocating devices to new ports or new switches (Add, Move, or Change type
operations)
■ Updating the core PID format
Compatibility
SAN Switch firmware v3.1.x is compatible with the StorageWorks SAN Switch
software version 2.6.1 and 4.1.x, allowing both 1 and 2 Gb switches to operate in
the same fabric.
For the latest supported configurations, please refer to the HP StorageWorks SAN
Product Support Tables for the SAN Design Reference Guide, part number
AV-RNZEM-TE, available at:
http://h18000.www1.hp.com/products/storageworks/san/documentation.html
Note: HP StorageWorks 1 Gb switch models running software version 1.6d are not
supported with the SAN Switch 2/8.
The minimum supported firmware level for the StorageWorks Enterprise Virtual
Array is VCS v1.02. The upgrade of the Enterprise storage subsystem firmware
must be performed before the upgrade of the switch firmware. Please consult the
Enterprise Virtual Array technical documentation for specific information for
upgrading VCS firmware.
MIB Files
MIB files are used for SNMP applications such as HP OpenView and HP Insight
Manager. The SAN Switch 2/8 supports the following MIB files:
■ BRCD_v5_0.mib—Switch Vendor Registration MIB
■ ENTITY_RFC2737.mib—Switch Entity MIB
■ FA_v3_0.mib—Fibre Alliance Framework Integration MIB
■ FE_RFC2837.mib—Fabric Element Switch MIB
■ HA_v5_0.mib—High Availability MIB
■ SW_v5_0.mib—Switch MIB