MIB Reference Manual (Version 3.0)

MIB Reference Manual Version 3.0 2-7
Fibre Alliance MIB Object Types
2
The Connectivity Group
Implementation of the Connectivity group is mandatory for all systems.
uNumber
Syntax Integer
Access Read-only
Status Mandatory
Description The number of connectivity units present on this system (represented by this agent). May be a
count of the boards in a chassis or the number of full boxes in a rack.
Note: The connectivity unit is mapped to a switch.
uNumber is always set to 1.
systemURL
Syntax Display String
Access Read-only
Status Mandatory
Description The top-level URL of the system. If it does not exist the value is empty string. The URL format is
implementation dependant and can have keywords embedded that are preceded by a percent sign
(for example,%USER).
The following are the defined keywords that are recognized and replaced with data during a launch:
USER Replace with username
PASSWORD Replace with password
GLOBALI Replace with globalid
SERIALNO Replace with serial number
DEFVAL {“”}
Note: The expected value for systemURL.0 is:
• “http://{a.b.c.d}”
where {a.b.c.d} is the IP address of the switch.
• “” (null)