MIB Reference Manual (Version 3.0)

1-64 MIB Reference Manual Version 3.0
MIB-II Object Types
1
egpNeighEventTrigger
Syntax
Access Read-write
Status Mandatory
Description A control variable used to trigger operator-initiated Start and Stop events.
Note: When read, this variable always returns the most recent value that egpNeighEventTrigger
was set to. If it has not been set since the last initialization of the network management
subsystem on the node, it returns a value of stop.
When set, this variable causes a Start or Stop event on the specified neighbor, as specified
on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor
acquisition and a non-Idle peer to re-initiate neighbor acquisition. A stop event causes a
non-Idle peer to return to the Idle state until a Start event occurs, either via
egpNeighEventTrigger or otherwise.
Additional EGP Objects
egpAs
Syntax Integer
Access Read-only
Status Mandatory
Description The autonomous system number of this EGP entity.
Value Declaration Description
Integer 1 (start)
2 (stop)