MIB Reference Manual (Version 3.0)

MIB Reference Manual Version 3.0 1-19
MIB-II Object Types
1
ifOutErrors [ifTable]
Syntax Counter
Access Read-only
Status Mandatory
Description The number of outbound packets that could not be transmitted because of errors.
ifOutQLen [ifTable]
Syntax Gauge
Access Read-only
Status Mandatory
Description The length of the output packet queue (in packets).
ifSpecific [ifTable]
Syntax Object Identifier
Access Read-only
Status Mandatory
Description A reference to MIB definitions specific to the particular media being used to realize the interface.
For example, if the interface is realized by an ethernet, then the value of this object refers to a
document defining objects specific to ethernet. If this information is not present, its value should be
set to the Object Identifier 0 0, which is a syntactically valid object identifier, and any conferment
implementation of ASN.1 and BER must be able to generate and recognize this value.
Note: fei0 returns null OID.
lo0 returns null OID.
fc0 returns null OID.