MIB Reference Manual (Version 3.0)

MIB Reference Manual Version 3.0 4-37
FCSwitch MIB Object Types
4
swFCPortLinkState [swFCPortTable]
Syntax
Access Read-write
Status Mandatory
Description Indicates the link state of the port.
Note: When the port's link state changes, its operational status (swFCPortOpStatus) is affected.
swFCPortTxType [swFCPortTable]
Syntax
Access Read-only
Status Mandatory
Description Indicates the media transmitter type of the port.
swFCPortTxWords [swFCPortTable]
Syntax Counter
Access Read-only
Status Mandatory
Description Counts the number of Fibre Channel words that the port has transmitted.
Value Declaration Description
Integer 1 (enabled)
2 (disabled)
3 (loopback)
The port is allowed to participate in the FC-PH protocol with
its attached port (or ports if it is in a FC-AL loop).
The port is not allowed to participate in the FC-PH protocol
with its attached port(s).
The port may transmit frames through an internal path to
verify the health of the transmitter and receiver path.
Value Declaration Description
Integer 1 (unknown)
2 (lw)
3 (sw)
3 (ld)
3 (cu)
Cannot determined to the port driver.
Long wave laser.
Short wave laser.
Long wave LED.
Copper (electrical).