MIB Reference Manual (Version 3.0)

MIB Reference Manual Version 3.0 4-35
FCSwitch MIB Object Types
4
swFCPortType [swFCPortTable]
Syntax
Access Read-only
Status Mandatory
Description The type of ASIC for the switch port.
The valid value for the FC Entry Switch 8B, FC Switch 8B, and FC 16B: 4
swFCPortPhyState [swFCPortTable]
Syntax
Access Read-only
Status Mandatory
Description The physical state of the port.
Value Declaration Description
Integer 1 (stitch)
2 (flannel)
3 (2000 Series)
4 (3000Series)
Value Declaration Description
Integer 1 (noCard)
2 (noGbic)
3 (laserFault)
4 (noLight)
5 (noSync)
6 (inSync)
7 (portFault)
8 (diagFault)
9 (lockRef)
No card is present in this switch slot.
No GBIC module in this port.
The module is signaling a laser fault (defective GBIC).
The module is not receiving light.
The module is receiving light but is out of sync.
The module is receiving light and is in sync.
The port is marked faulty (defective GBIC, cable or
device).
The port failed diagnostics (defective G_Port or FL_Port
card or motherboard).
Port is locking to the reference signal.