MIB Reference Manual (Version 3.0)

MIB Reference Manual Version 3.0 4-17
FCSwitch MIB Object Types
4
swFlashDLOperStatus
Syntax
Access Read-only
Status Mandatory
Description The operational status of the FLASH.
swFlashDLAdmStatus
Syntax
Access Read-write
Status Mandatory
Description The desired state of the FLASH.
The host is specified in swFlashDLHost.0. In addition, user name is specified in swFlashDLUser.0,
and the file name specified in swFlashDLFile.0.
Note: For more information about the following commands, reference the appropriate user guide.
• firmwareDownload
• configUpload
• configDownload
Value Declaration Description
Integer 1 (swCurrent)
2 (swFwUpgraded)
3 (swCfUploaded)
4 (swCfDownloaded)
The FLASH contains the current firmware image or
configuration file.
The FLASH contains the image upgraded from the
swFlashDLHost.0.
The switch configuration file has been uploaded to the host.
The switch configuration file has been downloaded from the
host.
Value Declaration Description
Integer 1 (swCurrent)
2 (swFwUpgrad)
3 (swCfUpload)
4 (swCfDownload)
The FLASH contains the current firmware image or
configuration file.
The firmware in the FLASH is to be upgraded from the host
specified.
The switch configuration file is to be uploaded to the host
specified.
The switch configuration file is to be downloaded from the
host specified.