MIB Reference Manual (Version 3.0)

4-14 MIB Reference Manual Version 3.0
FCSwitch MIB Object Types
4
swOperStatus
Syntax
Access Read-only
Status Mandatory
Description The current operational status of the switch.
swAdmStatus
Syntax
Access Read-write
Status Mandatory
Description The desired administrative status of the switch. A management station may place the switch in a
desired state by setting this object accordingly.
Note: When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot.
Value Declaration Description
Integer 1 (online)
2 (offline)
3 (testing)
4 (faulty)
The switch is accessible by an external Fibre Channel port.
The switch is not accessible.
The switch is in a built-in test mode and is not accessible by
an external Fibre Channel port.
The switch is not operational.
Value Declaration Description
Integer 1 (online)
2 (offline)
3 (testing)
4 (faulty)
5 (reboot)
6 (fastboot)
Set the switch to be accessible by an external Fibre Channel
port.
Set the switch to be inaccessible.
Set the switch to run the built-in test.
Set the switch to a “soft” faulty condition.
Set the switch to reboot in 1 second.
Set the switch to fastboot in 1 second. Fastboot causes the
switch to boot but skip over the POST.