MIB Reference Manual (Version 3.0)

2-52 MIB Reference Manual Version 3.0
Fibre Alliance MIB Object Types
2
connUnitLinkIndex [connUnitLinkTable]
Syntax Integer of size 0 to 2147483647
Access Read-only
Status Mandatory
Description This value is used to create a unique value for each entry in the link table with the same
connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the
next candidate to be used. This value is allowed to wrap at the highest value represented by the
number of bits. This value is reset to zero when the system is reset and the first value to be used is
one.
Note: Indexes 1 through 16 is reserved for ISL;
Indexes 17 and above are reserved for end devices, and are calculated based on portID of
the end device(s).
connUnitLinkNodeIdX [connUnitLinkTable]
Syntax Octet String of size 64
Access Read-only
Status Mandatory
Description The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a
connUnit in the responding agent then the value of this object MUST BE equal to its connUnitID.
Note: WWN of the local switch.
connUnitLinkPortNumberX [connUnitLinkTable]
Syntax Integer
Access Read-only
Status Mandatory
Description The port number on the unit specified by connUnitLinkNodeIdX if known, otherwise -1. If the
value is nonnegative then it is equal to connUnitPortPhysicalNumber.
Note: ISL: Physical port # of the e-port.
Device: Physical port # to which the device is connected.