MIB Reference Manual (Version 3.0)

2-42 MIB Reference Manual Version 3.0
Fibre Alliance MIB Object Types
2
connUnitPortStatObject [connUnitPortTable]
Syntax Object Identifier
Access Read-only
Status Mandatory
Description This contains the OID of the first object of the table that contains the statistics for this particular
port. If this has a value of zero, then there are no statistics available for this port. The port type
information helps identify the statistics objects that are found in the table. From this point, one
would do a getnext to get the next statistics object. When the first part of the OID changes, the end
of table is reached.
Note: Mapped to connUnitPortStatFabricUnitId.
connUnitPortProtocolCap [connUnitPortTable]
Syntax Octet String of size 2
Access Read-only
Status Mandatory
Description This is the bit mask that specifies the driver level protocol capability of this port.
Note: If this is not applicable, return all bits set to zero.
The bits have the following definition:
0 = unknown
1 = Loop
2 = Fabric
4 = SCSI
8 = TCP/IP
16 = VI
32 = FICON