HP Surestore FC 1Gb/2Gb Switch 8B Installation and Reference Guide

A-4 Installation and Reference Guide
Product Specifications
A
The general specifications for the FC Entry Switch 8B and FC Switch 8B are listed in the following
table.
Specification Description
Configurable port types The switch supports F_Port, FL_Port, and E_Port
connections
EMI classification An operating switch conforms to the EMI
(electromagnetic interference) radiation levels specified
by the following regulations:
• FCC Rules & Regulations, Part 15B, Class A
level
• CISPR22 Class A
• EN55022 Class A
• VCCI Class A ITE
• AS/NZS 3548 Class A
System architecture Non-blocking shared-memory switch
System processor Intel 80960VH, 100MHz CPU
ANSI Fibre Channel protocol FC-PH: Fibre Channel Physical and Signalling Interface
standard
Modes of operation Fibre Channel Class 2 and Class 3
Fabric initialization Complies with FC-SW 5.0
FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of the FCA profile
Aggregate switch I/O bandwidth 32 Gbps if all eight ports running at 2 Gbps, full duplex
Frame buffers 27 buffers per E_Port and 16 buffers per F_Port at 2112
bytes per frame
Port to port latency Less than 2 microseconds with no contention (destination
port is free)
Data transmission range With 50 u cable at 2 Gbps:
• Up to 300 m (984 ft.) for short-wavelength
optical link
• Up to 10 km (6.2 mi.) for long-wavelength
optical link
With 62.5 u cable at 2 Gbps:
• Up to 150 m (492 ft.) for short-wavelength
optical link
• Up to 10 km (6.2 mi.) for long-wavelength
optical link