HP Surestore FC 1Gb/2Gb Switch 8B Installation and Reference Guide

Installation and Reference Guide A-3
Product Specifications
A
Power Supply Specifications
The power supply is universal and capable of functioning worldwide without using voltage jumpers
or switches. It meets IEC 61000-4-5 surge voltage requirements and is autoranging in terms of
accommodating input voltages and line frequencies.
The power supply specifications for the FC Entry Switch 8B and FC Switch 8B are listed in the
following table.
Environmental Requirements
The environmental ranges that are acceptable when the FC Entry Switch 8B or FC Switch 8B is
operating and when it is not operating are listed in the following table.
General Specifications
The switch supports F_Port, FL_Port, and E_Port connections and DNS (Distributed Name
Server). It is EMC (Electromagnetic Compatibility) compliant.
Specification Value
Outlet Correctly wired and earth-grounded
Maximum output 75 watts
Maximum system power consumption 50 watts
Input voltage 90-264 VAC
Input line frequency 47 - 63 Hz
Harmonic distortion Active power factor correction per IEC1000-3-2
BTU rating 60 watts x 3.412 BTU/hr/watts = 204.72 BTU/hr
Inrush current 40 amps maximum, cold start at 25°C
Input line protection Fused in hot line
Condition Acceptable Range
During Operation
Acceptable Range
During Non-Operation
Temperature 10°C to 40°C -35°C to 65°C
Humidity 20% to 85% RH non-condensing, at 40°C 85% RH non-condensing, at 70°C
Altitude 0 to 3 kilometers above sea level 0 to 12 kilometers above sea level
Shock 4 G, 11 MS duration, half sine 20 G, 11 MS duration, sq.wave
Vibration 5 G, 0-3 kHz at 1.0 octave/minute 10 G, 0-5 kHz at 1.0 octave/minute