HP Surestore FC 1Gb/2Gb Switch 8B Installation and Reference Guide

Installation and Reference Guide 2-5
Installing and Configuring the Switch
2
To install the switch in an HP rack:
1. Check contents of the shipping carton to verify all the required parts and hardware are
available.
2. Choose a mounting location in the rack for the switch.
3. Attach the rear rail-tray brackets to the rear rack uprights by installing each of the two
mounting brackets with one M5 Torx head screw with captive lock washer as shown in
Figure 2-2.
Figure 2-2 Installing the Rear Rail-Tray Brackets