HP Surestore FC 1Gb/2Gb Switch 8B Getting Started Guide

19
2
SETUP
System Components
The FC Entry Switch 8B or FC Switch 8B consists of the following
components:
• A chassis designed to be mounted in a 1U rack space, with forced-air
cooling that flows from the fan side of the switch to the cable side.
• Eight optical ports, compatible with SFP (small form factor pluggable)
media.
• One RS-232 serial port (DB9 connector) on the SFP media side.
• One IEEE compliant RJ-45 connector on the SFP media side for use
with 10/100 Mbps Ethernet or in-band.
• Human-readable labels (including IP address label) and bar code labels
on the top of the switch.
• A total of 20 LEDs:
– One LED on the SFP media side to indicate the overall switch status.
– Two LEDs for each of the eight ports to indicate port status and link
speed information.
– Two LEDs for the Ethernet port to indicate port status and link speed
information.